YULONGNE 1000W Pure Sine Wave Inverter - 12V DC to 110V AC
Ships free and usually arrives in 3-7 business days.
Details
Details
A 1000 W pure sine wave inverter for a 12 V battery bank, with two US outlets, USB-C and USB-A on the front, and an LCD that shows battery voltage and the watts you are actually pulling. Continuous output is 1000 W. Peak is 2000 W, and peak is only for the instant a motor starts.
Built for trucks, vans, RVs, camping and small backup setups. It is an inverter only: no solar charge controller and no battery charger inside. Work out what you need to run on our What Size Do I Need? page before you order.
Specifications
| Continuous (rated) power | 1000 W |
| Peak power | 2000 W |
| Battery input voltage | 12 VDC |
| AC output | 110 VAC plus or minus 10% |
| Output frequency | 60 Hz, switchable to 50 Hz on the front panel |
| Waveform | Pure sine wave |
| Conversion efficiency | 0.9 |
| AC outlets | 2 x US three-prong |
| USB | 1 x USB-C 30 W PD, 2 x USB-A 5 V / 3.1 A |
| Display | On-board LCD (volts, watts, load, frequency) plus a wired remote LCD |
| DC terminals | Bolt-down positive and negative posts, plus an earthing screw |
| Cooling | Two fans on the DC end |
| Model | YLZK 1000W |
| Weight | 6.8 lb (3.1 kg) |
What it does
- 1000 W continuous, 2000 W peak. Two separate numbers, and the unit is printed with both. Only the 1000 W figure is a load you can hold.
- It tells you what you are drawing. The LCD shows battery voltage and live wattage, so an overload is visible before it trips.
- The display comes off the inverter. A second LCD panel with its own power button is in the box, on a flat network cable, so the inverter can sit by the battery.
- Charges phones and laptops without the AC. 30 W PD on the USB-C port, two 5 V / 3.1 A USB-A ports.
- 50 Hz or 60 Hz. A slide switch on the front, next to the outlets.
What's in the box
- YULONGNE YLZK 1000 W inverter
- Two battery cables, one red and one black, ring terminals fitted. YULONGNE does not specify the AWG gauge or the length of these cables. We will not invent a number. Compare what arrives with the current figure below.
- Wired remote LCD panel with power button
- Flat RJ45 cable for the remote panel
- No fuse and no breaker are included
Before you order
- 12 V battery bank only. Not a 24 V unit and not a 48 V unit.
- About 93 A at full load. 1000 W from 12 V at the stated 0.9 efficiency. Your cable, your terminals and your breaker have to carry that.
- Fit a fuse or a breaker on the battery side. Not supplied.
- Two outlets share the 1000 W. They are not 1000 W each. Add the running watts of everything plugged in; the sizing guide does the sum.
- Nothing recharges the bank. No MPPT and no charger inside. You need a separate charge controller or converter.
- Bolt-on posts, not clamp terminals. The supplied cables have ring terminals to match. Anything you make yourself needs rings too.
Shipping
Ships free from our US warehouse. Out the door in 1-2 business days, delivered in 3-7 business days. Shipping weight 6.8 lb (3.1 kg).
Shipping & Returns
Shipping & Returns
Ships free, usually arriving in 3-7 business days. Not right for your space? Return it within 30 days for a refund. See our Shipping Policy and Returns & Refunds.
Materials & Care
Materials & Care
Wipe gently with a soft, damp cloth to remove dust; dry with a clean cloth. Avoid harsh chemicals, abrasive cleaners and excess moisture to protect the finish. Keep out of prolonged direct sunlight to preserve the color.
Checkout is secure. We never store your card details. Pay with Shop Pay, Apple Pay, Google Pay, PayPal or any major card.
Couldn't load pickup availability