{"product_id":"yulongne-1000w-pure-sine-wave-inverter-12v","title":"YULONGNE 1000W Pure Sine Wave Inverter - 12V DC to 110V AC","description":"\u003cp\u003eA 1000 W pure sine wave inverter for a 12 V battery bank, with two US outlets,\nUSB-C and USB-A on the front, and an LCD that shows battery voltage and the watts you are\nactually pulling. Continuous output is 1000 W. Peak is 2000 W, and peak is only for the\ninstant a motor starts.\u003c\/p\u003e\n\n\u003cp\u003eBuilt for trucks, vans, RVs, camping and small backup setups. It is an inverter only:\nno solar charge controller and no battery charger inside. Work out what you need to run on\nour \u003ca href=\"\/pages\/sizing-guide\"\u003eWhat Size Do I Need?\u003c\/a\u003e page before you order.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eContinuous (rated) power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePeak power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery input voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAC output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e110 VAC plus or minus 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60 Hz, switchable to 50 Hz on the front panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWaveform\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePure sine wave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConversion efficiency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAC outlets\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 x US three-prong\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x USB-C 30 W PD, 2 x USB-A 5 V \/ 3.1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOn-board LCD (volts, watts, load, frequency) plus a wired remote LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC terminals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBolt-down positive and negative posts, plus an earthing screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo fans on the DC end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYLZK 1000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.8 lb (3.1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000 W continuous, 2000 W peak.\u003c\/strong\u003e Two separate numbers, and the unit is\nprinted with both. Only the 1000 W figure is a load you can hold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt tells you what you are drawing.\u003c\/strong\u003e The LCD shows battery voltage and\nlive wattage, so an overload is visible before it trips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe display comes off the inverter.\u003c\/strong\u003e A second LCD panel with its own power\nbutton is in the box, on a flat network cable, so the inverter can sit by the battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharges phones and laptops without the AC.\u003c\/strong\u003e 30 W PD on the USB-C port, two\n5 V \/ 3.1 A USB-A ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 Hz or 60 Hz.\u003c\/strong\u003e A slide switch on the front, next to the outlets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYULONGNE YLZK 1000 W inverter\u003c\/li\u003e\n\u003cli\u003e\nTwo battery cables, one red and one black, ring terminals fitted.\n\u003cstrong\u003eYULONGNE does not specify the AWG gauge or the length of these cables.\u003c\/strong\u003e\nWe will not invent a number. Compare what arrives with the current figure below.\u003c\/li\u003e\n\u003cli\u003eWired remote LCD panel with power button\u003c\/li\u003e\n\u003cli\u003eFlat RJ45 cable for the remote panel\u003c\/li\u003e\n\u003cli\u003eNo fuse and no breaker are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 V battery bank only.\u003c\/strong\u003e Not a 24 V unit and not a 48 V unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbout 93 A at full load.\u003c\/strong\u003e 1000 W from 12 V at the stated 0.9 efficiency.\nYour cable, your terminals and your breaker have to carry that.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit a fuse or a breaker on the battery side.\u003c\/strong\u003e Not supplied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo outlets share the 1000 W.\u003c\/strong\u003e They are not 1000 W each. Add the running\nwatts of everything plugged in; the \u003ca href=\"\/pages\/sizing-guide\"\u003esizing guide\u003c\/a\u003e does the sum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNothing recharges the bank.\u003c\/strong\u003e No MPPT and no charger inside. You need a\nseparate charge controller or converter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on posts, not clamp terminals.\u003c\/strong\u003e The supplied cables have ring\nterminals to match. Anything you make yourself needs rings too.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eShips free from our US warehouse. Out the door in 1-2 business days, delivered in 3-7 business days. Shipping weight 6.8 lb (3.1 kg).\u003c\/p\u003e","brand":"Prestonsupply","offers":[{"title":"Default Title","offer_id":54879219384647,"sku":"200007763:201336106","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/7605\/1015\/files\/S89696fabed094bb1987e3ef30ef1a8d2h.webp?v=1788488390","url":"https:\/\/prestonsupply.com\/products\/yulongne-1000w-pure-sine-wave-inverter-12v","provider":"Prestonsupply","version":"1.0","type":"link"}